+
Xem slide ảnh gốc

Behringer NX6000D Power Amplifier 6000W with DSP

749AUD

Thương hiệu: Behringer

Mã sản phẩm: NX6000D

Behringer NX6000D power amplifier with DSP is the latest in the new NX series. Utilising the latest Class-D technology for maximum output without the added weight. A perfect power amp solution for DJs, bands, performers, and more.

Bảo hành: 12 tháng

Behringer NX6000D

The Behringer NX6000D Power Amplifier features a two channel design with a built-in DSP section (that can be controlled over USB or directly from the front-panel LCD) boasting a sophisticated delay, crossover, EQ, and much more. The amplifier delivers a maximum output of 6000 as 2 x 3000 watts into 4 ohms, or 2 x 1600 watts into 8 ohms. The rear panel of the NX6000D power amp offers two XLR and 1/4” TRS combo input connectors, along with two professional-quality twist-lock speaker connectors. The detented and illuminated gain controls ensure precise level setting whilst the 4-segment signal and limit LEDs provide at-a-glance monitoring. Complete with extensive overload protection, ”Zero-Attack” limiters and a rack-mountable chassis, the Behringer NX6000D amp is perfect for installations within live performance venues and commercial environments.

Class-D – Massive Power, Perfect Sound

Thanks to the High-Density Class-D amplifier Technology, the NX6000D delivers enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

Sublimely Simple Operation

The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1/4″ TRS Input connectors, making the NX6000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.

The rear panel is also where you’ll find the switches that enable the NX6000 amp to run in your choice of dual mono or stereo modes. The NX6000’s built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channeled to your full-range loudspeakers.

  • Delivers 3,000W/channel into 4 ohms or 1,600W/channel into 8 ohms
  • Class D technology with “near-zero” thermal buildup runs extremely cool
  • Efficient switch-mode power supply gives you low noise, superior transient response, and low power consumption
  • SmartSense loudspeaker impedance compensation yields linear frequency response at any speaker load
  • Impressive damping factor offers superior amplifier control over your speakers
  • Zero-attack limiters supply maximum output with reliable overload protection
  • High-performance DSP offers sophisticated delay, a crossover, EQ, dynamics processing, and more
  • 24-bit/96kHz converters ensure excellent signal integrity and ample dynamic range
  • Positive-detent gain controls with 4-segment LED metering on each channel make gain-staging easy
  • Rear-panel combo XLR and 1/4″ TRS input connectors ensure compatibility with just about any source
  • Reliable twist-lock speaker connectors prevent unwanted “unplugging” incidents
  • Thermal overload protection protects your amplifier and speakers

Number of Channels: 2

Power Class: Class D

Watts/Side @ 8 ohms: 1600W

Watts/Side @ 4 ohms: 3000W

Inputs: 2 x XLR-1/4″ combo

Outputs: 2 x SpeakON

Cooling System: Dual Variable Speed Fans (back to front air flow)

DSP: Delay, 8-band Parametric, 2-band Dynamic EQ, Peak Limiter, 20 total presets (19 user)

Filters: 3 x Crossover Filters 48dB/octave

Overload Protection: Thermal and DC protection

Rack Spaces: 2U

Dimensions: 94 x 483 x 316 mm

Weight: 5.9 kg

 

Đánh giá

Chưa có đánh giá nào.


Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.

Thêm sản phẩm vào giỏ hàng thành công: