Behringer NX4-6000 Power Amp with Smart Sense


Thương hiệu: Behringer

Mã sản phẩm: NX4-6000

Behringer NX4-6000 Power Amp with Smart Sense

Bảo hành: 12 tháng

Behringer NX4-6000 Power Amp with Smart Sense

Behringer NX4-6000 Power Amp with Smart Sense offers a lightweight, rack-mountable and sturdy, stereo power amplifier capable of delivering 440W of peak power per channel at 8 Ohms, or in bridge mode, up to 1600W of peak power into two 8-Ohm speakers.  The Behringer NX4-6000 Power Amp packs an impressive amount of power into a lightweight, cool-running unit, that ensures you’ll have plenty of headroom to work with.  Employing SmartSense loudspeaker impedance compensation technology combined with a switch-mode power supply will enable you to benefit Benefit from a linear frequency response at any speaker load. Provide a linear 20 Hz to 20 kHz frequency response with noise-free audio and fast transient response at maximum output power, into any speaker load impedance. Zero-attack limiters supply maximum output with reliable overload protection. Experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply.

The NX4-6000 features cool-running, high-density Class-D technology with near-zero thermal buildup, and an independent DC, LF, and thermal overload protection on each channel, which together protect the amplifier from shutting down and interrupting your show. A variable-speed fan and ventilation openings with back-to-front air flow further prevent overheating.

Operating the NX4-6000 is dead simple. Benefit from at-a-glance confirmation of your system’s vital signs, by way of the NX4-6000’s simple front-panel controls and indicators. Positive-detent gain controls with signal level LEDs on each channel make gain staging a piece of cake. Rear-panel XLR combo input connectors ensure compatibility with just about any source. Reliable twist-lock speaker connectors prevent unwanted “unplugging” incidents. You also get switchable dual mono, stereo, and mono bridge modes, along with an easy-to-use stereo crossover.

There is no need for  massive heat sinks or toroid transformers any more, this D Class Power Amp from Behringer has an impressive amount of punch and clarity.

  • Delivers a maximum of 4 x 1600W at 2 Ohms, 4 x 860W at 4 Ohms, or 4 x 440W at 8 Ohms in stereo mode
  • Delivers a maximum of 2 x 3000W at 4 Ohms or 1600W at 8 Ohms in bridge mode
  • Weighs only 6 kgs
  • Cool-running, high-density Class-D technology with near-zero thermal buildup
  • Efficient switch-mode power supply for noise-free audio, fast transient response, and low power consumption
  • SmartSense loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
  • Zero-attack limiters offer maximum output level with reliable overload protection
  • Built-in stereo crossover with low-cut, high-cut, and full-range mode
  • Detented and illuminated gain controls for precise level setting
  • Precise 4-segment Signal and Limit LEDs to monitor performance
  • XLR and 1/4″ TRS combination input connectors for compatibility with balanced and unbalanced audio sources
  • Twist-lock speaker connectors for reliable connection
  • Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without interruption
  • Back-to-front ventilation system prevents thermal buildup for reliable operation

Maximum Output Power:

  • 4 x 1600 W into 2 Ohms per channel, stereo
  • 4 x 860 W into 4 Ohms per channel, stereo
  • 4 x 440 W into 8 Ohms per channel, stereo
  • 2 x 3000 W into 4 Ohms, bridged
  • 2 x 1600 W into 8 Ohms, bridged

Amplifier: Class Class-D

Input Sensitivity: 0.775 V (0 dBu), for rated power into 4 Ohms

Distortion: <0.2%

Frequency Response: 20 Hz to 20 kHz, +0 / -2 dB

Damping Factor: >145 at 8 Ohms

Signal to Noise: >100 dB

Input Connections: 4 x XLR-1/4″ combo jacks

Input Impedance:

  • 10 kOhms, unbalanced
  • 20 kOhms, balanced

Output Connectors: 4 x locking-style speaker connectors


  • Front Panel:
    • Channel A, B, C, and D
    • gain knobs
    • Power switch
  • Rear Panel:
    • 2 x mode switches (bridge, stereo, mono)
    • 2 x crossover switches (LF, full range, HF)
    • Circuit breaker

Indicators Power: Amber LED

Limit: 0 dB LED (per channel)

Signal: -40, -6, -3 dB LEDs (per channel)

Protect: Red LED (per channel)

Cooling: Continuously variable speed fan  with Back-to-front air flow

Amplifier Protection:

  • Thermal and DC protection
  • Stable into reactive or mismatched loads

Overload Protection:

  • On/off muting
  • DC-fault power supply shutdown

Power Supply: 120 VAC, 60 Hz

Fuse: T 25 A H, 250 V

Power Consumption: 620 W, at 2 Ohms, 1/8 rated power

Power Connector: Standard IEC receptacle

Dimensions (W x H x D): 48.3 x 9.4 x 31.6 cm (including  5 mm rubber feet)
Weight: 6.1 kg

Đánh giá

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.

Thêm sản phẩm vào giỏ hàng thành công: